10. Installing the Speakers and Audio Amp
Written By: noah
- Difficulty
- Very Easy
- Estimated Completion Time
- 10 minutes
- Steps
- 2
Step 1 Inserting the Speakers
- From the bag labeled "Audio Amp" take out both the amp PCB and the speakers.
- Then, place the speakers into the front casing with the pins facing down as shown in the provided image.
Step 2 Securing the Amplifier PCB
- Using the M2x4 screws, secure the audio amp PCB to the front casing.
- After you've fastened all 4 screws, this section is complete!